Submission Rules(Poppin' Jump)

A large number of spaces will be set up at each venue. We would like to have many gorgeous spaces lined up in a lively and fun venue.
Meanwhile, to deal with the problems inherent to large-scale worlds, we will set rules for space creation.
- To maintain a comfortable playing environment for visitors due by avoiding high load on the PC
- Avoid inconsistent formats that will cause difficulties for the organizers to check and manage the spaces
- Avoid fatal bugs such as instance crush resulting in VRChat crush or returning to another world
Before submission, make sure to check the compliance with the submission rules. Please use the submission tool (hereinafter referred to as VketTools) distributed from the organizer.
Please note that if the submitted space does not comply with the submission rules, the organizers will take measures such as resubmission request or non-placement.
Even if the space complies with the submission rules, if the space is deemed problematic such as taking up a high load, a resubmission may be requested by the organizers.
When submitting complex gimmicks or dynamically changing spaces, we may not be able to guarantee reproduction.
In the case of space with a significantly small amount of information, the exhibitor may be asked to confirm after the submission period, and the space may be removed only if the confirmation cannot be obtained.

A. Space creation system regulations

Create with Unity 2019.4.31f1.
For VRCSDK, use VRCSDK3-WORLD.
Use the latest version of VRCSDK and Udon at the time of submission.
Use VketTools for submission.
All assets used in the space should be placed under the [exhibitor ID] folder (e.g., 184) created directly under the Assets folder by VketTools.
Create the space on the [exhibitor ID] scene found in the above folder.

B. File & Folder regulations

Only half-width alphanumeric characters,-(hyphen), _ (underscore), (half-width space), .(Dot), and () (parentheses) can be used for file & folder names.
All files included in the Project should follow the above rule.
All file paths should fit within 184 characters under "Assets /" in Unity.
The mesh should be in such a format that can be used in Unity by default, such as ".FBX".
- ".Blend" files cannot be read by default.
- Be sure to extract the Textures and Materials of the mesh.
Total file capacity under the submission folder is within 100.00MB

C.Scene hierarchy structure regulations

All objects included in the space should be arranged and set according to the following regulations.
- Every object should be children of the [exhibitor ID] object.
- Under the hierarchy of the object named Static and Dynamic, which are the children of the aforementioned object. Place all objects according to the table below.

Static

Objects to be included

Objects containing non-moving meshes

Static setting (including child objects)

static

Dynamic

Objects to be included

Objects that can be moved or manipulated

Static setting (including child objects)

dynamic

example of objects belonging to Dynamic
- Animated objects (including not only move and rotate but also all changes such as show / hide)
- Pickup object
- ParticleSystem
- AudioSource
- Rigidbody
- Objects containing UdonBehaviour
- Objects that are operated by UdonBehaviour, such as moving and switching Active

※1: If Batching Static causes a distorted appearance, you may choose to remove it.

D. Space regulations

Your space must be contained within the boundary of 10m wide x 10m deep x 10m high
± 5m in the XZ direction and 10m in the Y direction with respect to the origin
Z axis + direction (the direction of the blue arrow in Unity) is the front
No limit on the number of textures
- However, atlasing (texture integration) is strongly recommended.
- One large size (4k) sheet is preferable to multiple small size (1k-2k) sheets.
AssetBundle build size within 20.00MB
- This is the file size when building the space with only VRC_World in place
SetPassCalls and Batches should be lower than the following values to reduce the drawing load.
- Run-time SetPassCalls reference value 120
- Run-time Batches estimated reference value 180
Lightmap limit: not more than 2 sheet of smaller than 512 x 512 pixels
Among the objects with ContributeGI checked (except those with ScalesInLightmap value of 0), those with overlapping lightmaps cannot be submitted.
Upon placement, the space may be rotated on the Y-axis.
Upon placement, the coordinates will be different from the origin.

E. Shader regulations

The shaders listed below will be distributed by the organizers with VketTools.
- Manmaru Sheda MnMrShader3_1_2
- Unity-chan Toon Shader 2.0.8
- Unlit_WF_ShaderSuite_20210905
- MToon v3.7
- UniUnlit in UniGLTF_VRMShaders-0.81.0_5126
- SunaoShader 1.4.4
- PoiyomiToonShader 7.2.41
- ArxCharacterShaders(AXCS) Build17
- Xiexes-Unity-Shaders v3.0 2p1
- Silent's Cel Shading Shader v1.10
- Mochie's Unity Shaders v1.17
The above shaders do not need to be included in the submission folder.
If you use the above shader with a different version or a modified script, be sure to use a duplicate and include it in the submission folder.
When creating your own shader, you cannot use your own shader keywords other than the Unity standard.
_CameraDepthTexture cannot be used.
When using Emission with the Standard shader, set Global Illumination to Baked.

F.Component regulation

Available Components

1. VRCSDK

UdonBehaviour
- 20 or less per space
  - Those in the official prefabs count.
- See Udon Rule for detailed rules.
VRC Object Sync
- 10 or less per space
  - Those in the official prefabs count.
- Allow Collision Ownership Transfer should be disabled.
VRC Pickup
- 10 or less per space
  - Those in the official prefabs count.
VRC Station
- Up to 4 per space
VRC Ui Shape
VRCSpatialAudioSource
- Adjust Far in such a way that the sound source does not affect the outside. Sound effects on up to 2 meters around the space can be accepted.
VRC Unity Video Player
- Can only be used as a part of official Prefabs.
- Up to 1 per space

2. Physics engine

Box Collider / SphereCollider / CapsuleCollider / Mesh Collider
- Mesh Collider is not recommended. Make similar shapes with other Colliders as much as possible.
- Do not stick out of the space.
Rigidbody
Fixed Joint
Spring Joint
Hinge Joint
Configurable Joint
Cloth
- Within 1 per space
Character Controller
Dynamic Bone
- Enable Distant Disable.
Dynamic Bone Collider

3. Rendering / Effect

Mesh Filter
Mesh Renderer
- Do not stick out of the Bounds space.
- For objects with ContributeGI checked, set the Layer allocation to Environment.
  - ContributeGI can only be used in the Environment Layer.
- Mesh Renderer with 0 materials is prohibited.
- Changing Lightmap Parameters is prohibited.
Skinned Mesh Renderer
- Do not stick out of the Bounds space.
- Disable Update When Offscreen.
- Skinned Mesh Renderer with 0 materials is prohibited.
Sprite Renderer
Sprite Mask
Sorting Group
Particle System / Trail Renderer / Line Renderer
- Do not stick out of the space during playback.
Light
- There is a limit to the settings. Use the values in the table below.
- Minimize the protrusion of lights from the space. If it sticks out, make it less than 2 meters (about 2 meters in front, back, up, down, left and right of each space will be allocated as a buffer area with other spaces. Please keep the light effect inside this area.)
- Please note that even if it is within the specified range, we may ask you to change or remove it if the installation method interferes with the baking work of the entire world or strongly affects other spaces.
Light Probe Group / Light Probe Proxy Volume
- Do not stick out of the space.
Reflection Probe
- Set Type to either Baked or Custom.
- Resolution is at maximum 128.
Camera
- Not more than 1 per space
- Set the component to Disabled in the initial state.
- Be sure to specify RenderTexture for TargetTexture.
- RenderTexture size up to 1024x1024.
Flare Layer
Skybox
Halo
Projector
- Not more than 1 per space
- Objects including Projector should be inactive in the initial state.
LOD Group
Post Process Volume
- Disable Is Global.
- 【Prohibited Effects】The below Effects cannot be used.
  - Ambient Occlusion
  - Screen Space Reflection
  - Depth of Field
  - Motion Blur
  - Lens Distortion

Light setting value limit

Directional Light cannot be used.

Type	Point or Spot	Area
Mode	Baked	(baked only)
Range	0~14	0~60
Intensity	0~10	0~10
Indirect Multiplier	0~15	0~15
Shadow Type	Soft Shadows or Hard Shadows	-
Cast Shadows	-	ON
Number limit	No limit	Up to 3 per space

4. Constraint

Aim Constraint
Look At Constraint
Parent Constraint
Position Constraint
Rotation Constraint
Scale Constraint

5. UI

Canvas / Layout related

Canvas
- Set Render Mode to World.
Canvas Scaler
Graphic Raycaster
Canvas Group
Grid Layout Group
Horizontal Layout Group
VerticalLayout Group
LayoutElement
Content Size Fitter

Drawing related

Canvas Renderer
Text Mesh Pro / Text Mesh Pro UGUI
- Include FontAsset in the submission folder (standard items do not need to be included).
Text
Outline
Shadow
Image
Raw Image
Mask
Rect Mask 2D
Aspect Ratio Fitter
PositionAsUV1

Input related

Button
Toggle
Toggle Group
Slider
Scrollbar
Scroll Rect
Dropdown / TMP_Dropdown
Input Field / TMP_Input Field
Event Trigger
Selectable

6. Others

Animator
- Not more than 50 per space
- Disable Apply Root Motion.
- Culling Mode should be set to Cull Update Transforms or Cull Completely in principle. Avoid Always Animate unless absolutely necessary.
AudioSource
- 10 or less per space
- Set the component to Disabled in the initial state.
- Adjust the Volume by referring to the sound source distributed by the organizer so that it does not become excessively loud.
- Set Spatial Blend to 1.0 except for those used in official Prefabs.
- Adjust Max Distance in such a way that the AudioSource does not affect the outside. Sound effects on up to 4 meters around the space can be accepted.
- Specifications of the sound source
  - Base loudness value: -14LUFS, with Ceiling set to -3.0dB
  - Export setting: .ogg -128kbps is recommended
Audio Reverb Zone
- Adjust Max Distance so that it does not affect the outside of the space.

Component that can only be used as part of official Prefabs

Prefab	Available Component
Vket_AvatarPedestal	VRC Avatar Pedestal
Vket_VideoPlayer	VRC Unity Video Player

Other components prepared by the organizers

Prohibited Component

All Components other than the above available Components

Controlled Component

The range of ± 10m on the X-axis, ± 10m on the Z-axis, and + 12m on the Y-axis with respect to the origin, that is an area of 20m width, 20m depth and 12m height, shall be defined as the Udon Update Range. The below Components shall be controlled by the organizer based on this range. - VRC Pickup - If used outside the official Prefabs, the object location will be reset once the player goes outside the Udon Update Range. - Camera - It will be Disabled once the local player goes outside the Udon Update Range. - AudioSource - It will be Disabled once the local player goes outside the Udon Update Range. - Projector - The Component with Projector attached will be made not Active once the local player goes outside the Udon Update Range. - VRCUnityVideoPlayer - Stop() function will be called once the local player goes outside the Udon Update Range. - Rigidbody - Objects with physics engine enabled, that is isKinematic being disabled, will not operate physics engine while there is no player inside the Udon Update Range.

Pedestal Avatar Regulations

Please observe the following for avatars set in VRC_Avatar Pedestal.

Skinned Mesh Renderer 8 or less
Material 16 or less
32 or less Transforms affected by Dynamic Bone
Dynamic Bone Collider 2 or less
Number of polygons 70,000 or less

World specifications

World installation
- VRC Mirror
World specifications
- Light setting
  - Default, Player, PlayerLocal, Pickup, MirrorReflection, Realtime that illuminates the layer, DirectionalLight of NoShadow
    - The angle of DirectionalLight depends on the world.
  - Baked light with Shadow for world structures that illuminate the Environment layer
  - LightProbes will be installed at eight locations on the outer circumference of each space.
  - A Reflection Probe for the world will be installed.
  - ProgressiveCPU is used for the light mapper.
- Layer settings
  - Default layer is used for objects that do not check ContributeGI (avatar model, etc.).
  - The Pickup layer is used for objects that do not check ContributeGI (such as small models to be carried).
  - The Environment layer is used for World structures and space exhibits that have ContributeGI checked.
  - UserLayer22 is used as a layer for Post Processing.
- Post Prosessing settings
  - Use Bloom from Post Processing Stack V2.
  - Use Version 2.3.0
- Navigation settings
  - NavMesh is not baked